Warnings, Warning – Graco Inc. 12004X User Manual
Page 3
Warnings
309739
3
Warnings
Warning
E
LECTRIC
S
HOCK
H
AZARD
Improper grounding, setup, or usage of the system can cause electric shock.
•
Turn off and disconnect power at main switch before disconnecting any cables and before servicing
equipment.
•
All electrical wiring must be done by a qualified electrician and comply with all local codes and regu-
lations.
•
Connect only to grounded power source.
S
KIN
I
NJECTION
H
AZARD
High pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just
a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.
•
Do not point gun at anyone or at any part of the body.
•
Do not put your hand over the spray tip.
•
Do not stop or deflect leaks with your hand, body, glove, or rag.
•
Engage trigger lock when not spraying.
•
Follow Pressure Relief Procedure on page 5 if the nozzle clogs and before cleaning, checking or
servicing equipment.
T
OXIC
F
LUID
H
AZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or
swallowed.
•
Read MSDS’s to know the specific hazards of the fluids you are using.
•
Store hazardous fluid in approved containers and dispose of it according to applicable guidelines.
E
QUIPMENT
M
ISUSE
H
AZARD
Equipment misuse can cause death or serious injury.
•
Do not exceed maximum working pressure or temperature rating of lowest rated system component.
See Technical Data in all equipment manuals.
•
Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all
equipment manuals. Read fluid and solvent manufacturers warnings.
•
Check equipment daily. Repair or replace worn or damaged parts immediately.
•
Do not alter or modify equipment.
•
For professional use only.
•
Use equipment only for its intended purpose. Call your Graco distributor for information.
•
Route hoses away from traffic areas, sharp edges, moving parts and hot surfaces.
•
Do not use hoses to pull equipment.