GE EER2001 - Manual (Page 10)

10
Consumer Support
Tr
oubleshooting T
ips
Care and Cleaning
Operating Instructions
Safety Instructions
Automatic Oven
Start
Time
Cooking
Time
Clock
Kitchen
Timer
On/Off
Time Controls
On/Off
Oven
Light
Self
Clean
Clear
Off
Broil
Hi/Lo
Start
On
Bake
Temp Recall
Oven Controls
Oven Control, Clock and Timer Features and Settings
Bake/Temp Recall Pad
Touch this pad to select the bake function.
Bake Light
Flashes while in edit mode—you can change
the oven temperature at this point. Glows
when the oven is in bake mode.
Start/On Pad
Must be touched to start any cooking or
cleaning function.
Display
Shows the time of day, oven temperature,
and the times set for the timer or automatic
oven operations. The display will show PrE
while preheating. When the oven reaches
the selected temperature, the oven control
will beep and the display will show the oven
temperature.
If “F– and a number or letter” flash in the display and the
oven control signals, this indicates a function error code.
If your oven was set for a timed oven operation and
a power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has
been a power outage. Reset the clock.
If the function error code appears during the self-cleaning
cycle, check the oven door latch. The latch handle may have
been moved, even if only slightly, from the latched position.
Make sure the latch is moved to the right as far as it will go.
Touch the Clear/Off pad. Allow the oven to cool for
one hour. Put the oven back into operation. If the function
error code repeats, disconnect the power to the range and
call for service.
Kitchen Timer On/Off
or Timer On/Off Pad
Touch this pad to select the timer feature.
Then press + and – pads to adjust time.
Timer Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the
timer has been activated. Flashes again when
the time has run out until the control is reset.
Clock Pad
To set the clock, press this pad twice and
then press the + and – pads. The time of
day will flash in the display when the oven
is first turned on.
Start Time Pad (on some models)
Use along with the Cooking Time or
Self Clean pads to set the oven to start
and stop automatically at a time you set.
Start Time Light
Flashes while in edit mode—you can change
the start time at this point. Glows when the
function has been activated.
Cooking Time Pad (on some models)
Touch this pad and then touch the + or –
pads to set the amount of time you want
your food to cook. The oven will shut off
when the cooking time has run out.
Cooking Time Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the
function has been activated. Flashes again
when the time has run out until the control
is reset.
Throughout this manual, features and appearance may vary from your model.
Using the oven controls.