beautypg.com

0 ad di tio na l i nf or m at io n – Graco PD108602A User Manual

Page 85

background image

41

1.

For ease of storing, extend

LATCH to its maximum length.

2.

Locate the storage bars on

bottom of infant restraint base

➌.

3.

Fasten connector (without

adjustment belt) onto storage bar.

4.

Repeat step 3 for connector with

adjustment belt. After fastening

onto storage bar, pull on

adjustment belt to make sure

LATCH is securely fastened.

5.

LATCH storage should look

like this when complete

➌.

8.1 Airplane Use

When installing in an airplane using the

base, install the same way as in an

automobile with a lap only belt leaving the

lock off fully opened to allow for buckle

clearance. If using the shell only installing

follow the same instructions as an automobile. Notify the airline

ahead of time that you intend to bring the seat on board.
Use only in forward-facing aircraft seat. Follow the flight

attendants instructions about infant restraint placement.

Do not use this infant restraint if the airplane seat belt does

not hold the infant restraint securely.

8.

0

Ad

di

tio

na

l I

nf

or

m

at

io

n

Storage bars

8.2 Storing LATCH

Underside of base

This manual is related to the following products: