Graco PD108602A - Manual (Page 79)

35
3. To create a secure installation, while
pushing down on the base, pull the free
end of the lap belt or the shoulder portion
of the lap/shoulder belt to tighten
➍
.
4. Close lock-off over lap belt AAN ND D free end or the
lap/shoulder belts
➎
.
Make sure that you push the top of the
lock-off all the way down.
5. Check that belt does not move by pulling
and pushing hard on base. If belt loosens
or lengthens, repeat procedure.
NEVER allow any object other than the
vehicle belts to go under or interfere with the
lock-off. If any other part of the vehicle belt
interferes with the lock-off choose another
seating location.
➎
Belts MUST go
under lock-off
Lap Belt Lap/Shoulder
Belt
➍