Graco PD108602A - Manual (Page 64)

20
5.1 Positioning Harness Straps
1. Remove infant restraint from base and
rotate handle down to sitting position.
See „ 4.1 Adjusting Handle‰ and „ 4.2
Removing and Attaching Seat‰ , page. 16.
2. Place child in infant restraint as shown
➊.
3. Determine which pair of harness slots
are even with or just below your
childÊ s shoulders ➋.
4. If the harness straps must be
adjusted: remove child from infant
restraint and move harness straps
to the proper harness slots by doing the
following:
Use harness slots
even with or just below
childÊ s shoulders
➋
➊
5.
0
U
si
ng
In
fa
nt
R
es
tra
in
t
FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS
FOR YOUR CHILD INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN THE EVENT OF A SHARP TURN,
SUDDEN STOP OR CRASH. The harness straps must be
properly adjusted to fit your child according to the following
instructions.