Grizzly G1030 - Manual (Page 13)

G1030 Dust Collector -11-
Figure 3. Mounting collector to base.
Figure 4. Mounting outlet to collector body.
Collector Body
The collector body includes the fan assembly,
switch, motor and power cord which are pre-
assembled at the factory. Set the collector body
on top of the base plate so the intake portion is
near the edge of the base plate and the bolt holes
are lined up as shown in
Figure 3. Secure the
collector body to the base plate with four (4) 5 ⁄
16
" -
18 x 1 ⁄
2
" bolts provided.
Outlet
The outlet can now be attached to the main col-
lector body. Insert the rubber gasket between the
collector and lower outlet flange and secure using
eight (8)
5 /
16
" - 18 x 1 ⁄
2
" bolts provided. Figure 4.