Grizzly G1030 - Manual (Page 10)

-8- G1030 Dust Collector
Unpacking
The Model G1030 Dust Collector is shipped from
the manufacturer in a carefully packed carton. If
you discover the machine is damaged after
you’ve signed for delivery,
please call Customer
Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• Collector Body Assembly
• Base
• Collectors (2)
• 3-Way Inlet
• Collection/Filter Bags (4)
• Lower Support Brackets (2)
• Casters (4)
• Rubber Gaskets (3)
• Upper Support Bracket (2)
• Outlet
• Bolt
5 ⁄
16
" - 18 x 1 ⁄
2
" (52)
• Bag Clamp Attachment Kit
• Bag Clamps (4)
• Bolt
1 ⁄
4
" - 20 x 2 1 ⁄
2
"(4)
• Nut (4)
• Open end Wrench
• Allen
® Wrench
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
The G1030 is a heavy machine (170 lbs.
shipping weight). DO NOT over-exert
yourself while unpacking or moving your
machine – get assistance. In the event that
your collector must be moved up or down
a flight of stairs, be sure that the stairs are
capable of supporting the combined
weight of people and the machine. Serious
personal injury may occur.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.