Beginning assembly, Base – Grizzly G1030 User Manual
Page 12
-10-
G1030 Dust Collector
SECTION 4: ASSEMBLY
Beginning Assembly
Assembly of the G1030 is straightforward and
can be accomplished quite easily. We have orga-
nized the assembly process into logical steps.
Please follow them in sequence.
You will find that some pre-assembly has been
done at the factory. For example, the motor and
switch are already mounted to the collector body
and the fan is mounted to the motor shaft.
Please spend some time with the drawings and
parts lists and become familiar with all the parts
before you begin assembly
Tools Required:
12mm open end wrench (sup-
plied), regular and Phillips
®
head screwdriver.
Figure 2.
Mounting casters to base.
Base
Position the base plate upside down and locate
the casters so they are within easy reach. Mount
the casters to the base plate using sixteen (16)
5
/
16
"-18 x
1
/
2
" hex bolts provided.
Figure 2.
- G0548Z (56 pages)
- G0671 (2 pages)
- G0671 (56 pages)
- G0638 (60 pages)
- G0703 11 (40 pages)
- G1029 (24 pages)
- G1028 (3 pages)
- G9955 (20 pages)
- Noise Reduction Kit for Cyclone s H8165 (1 page)
- Model G0638 (60 pages)
- G1028Z/G1029Z (40 pages)
- G1029Z (40 pages)
- G0637 (60 pages)
- G1029 (32 pages)
- Dust Hood G1837 (1 page)
- G0673 (56 pages)
- G0562 (2 pages)
- G1028Z (24 pages)
- G0441 (52 pages)
- Model G0562 (36 pages)
- G0710 (36 pages)
- Air Wonder Vacuum Kit H0587 (2 pages)
- G0442 (60 pages)
- G9958 (28 pages)
- G5954 (32 pages)
- G0508 (56 pages)
- G0631 (32 pages)
- 1 1/2 HP Cyclone G0703 (56 pages)
- G0672 (3 pages)
- G1030Z2 (48 pages)
- G1030Z2 (48 pages)
- H0602 (9 pages)
- G1163 (22 pages)
- G1032 (2 pages)
- 5HP Cyclone G0442 (60 pages)
- G9975 (2 pages)
- T10252 (4 pages)
- Cyclone s G0440 (56 pages)
- G1028Z/G1029 (32 pages)
- Top Bag G4832 (1 page)
- Model G8027 (32 pages)
- 50 Gallon Dust Collection Bag Holder H8174 (2 pages)
- G0689 (44 pages)
- G0583 (36 pages)