Installation instructions – GE GNSV70FBL User Manual
Page 11
Installation Instructions.
Mounting System Installation
Mounting System to Screws Installed in Wall
1. Remove shrink wrap from filter system.
2. Hang the system on the previously installed screws using the openings on the back of the unit (Fig. 9).
3. If the head of the screw will not slide into the upper slot, back out the screw by 1/4 turn and try again.
4. If the system is too loose when placed on the wall, tighten the screws by 1/4 turn and try again until a desired fit is achieved.
11
Min.
17 inches
5 inches
Fig. 9
See also other documents in the category GE Water equipment:
- Autotrol Performa ProSoft 960 Series (32 pages)
- SmartWater PNRQ15 (6 pages)
- SmartWater GXWH20F (16 pages)
- SmartWater GXSV10C (48 pages)
- Merlin (28 pages)
- PNRQ20FBB (84 pages)
- E4 (33 pages)
- GNSV25CBL (16 pages)
- GXSF27E (60 pages)
- GX1S01C (2 pages)
- ZDWC240 (16 pages)
- GXRM10RBL (64 pages)
- 400 Series (28 pages)
- SmartWater GXWH35F (2 pages)
- PNSF31Z01 (28 pages)
- F-801 (124 pages)
- GN1S04C (36 pages)
- 000 gpd (45 pages)
- GXCF20FBB (28 pages)
- 3020511 (4 pages)
- GXRM10G (64 pages)
- r10279v (8 pages)
- Z-10000 (128 pages)
- GNSV70F (2 pages)
- 268 (44 pages)
- WineChiller (32 pages)
- PNRQ21LRB (84 pages)
- GXPL03H (12 pages)
- GXSV65F (20 pages)
- MONACO 6000A (28 pages)
- GXFM03C (6 pages)
- GXSF35E (64 pages)
- GXRTDR (4 pages)
- Monogram ZDWI240WII (3 pages)
- GXSF30H (2 pages)
- GXFM07HWW (20 pages)
- GXSF4OH (64 pages)
- Profile Wine Chiller (32 pages)
- GXCF05D (24 pages)
- GXCF25FBS (28 pages)
- GNSV75F (2 pages)
- GNSH45E (64 pages)
- GXRM10GBL (2 pages)
- SmartWater GXRLQR (6 pages)
- GNULQ (16 pages)