Graco Inc. 243012 User Manual

Instructions/parts english, Sg2, sg3 spray guns

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

ti11562a

SG2, SG3 Spray Guns

Models: 243011, 243012, 246506, 243238, 243382, 289843, 257359

Maximum Working Pressure: 3600 psi (248 bar, 24.8 MPa)

For the application of architectural paints and coatings -

The following Warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point
symbol alerts you to a general warning and hazard symbols refer to procedure-specific risks. Refer back to these Warnings.
Additional, product-specific warnings may be found throughout the body of this manual where applicable.

SKIN INJECTION HAZARD

High-pressure fluid from gun, hose leaks, or ruptured
components will pierce skin. This may look like just a

cut, but it is a serious injury that can result in amputation. Get
immediate surgical treatment.

• Do not point gun at anyone or at any part of the body.
• Do not put your hand over the spray tip.
• Do not stop or deflect leaks with your hand, body, glove,

or rag.

• Do not spray without tip guard and trigger guard

installed.

• Engage trigger lock when not spraying.

•

Follow Pressure Relief Procedure in this manual, when
you stop spraying and before cleaning, checking, or ser-
vicing equipment

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes,
in work area can ignite or explode. To help prevent
fire and explosion:

• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, ciga-

rettes, portable electric lamps, and plastic drop cloths
(potential static arc).

• Keep work area free of debris, including solvent, rags

and gasoline.

• Do not plug or unplug power cords, or turn power or light

switches on or off when flammable fumes are present.

• Ground all equipment in the work area. See Grounding

instructions.

• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering

into pail.

• If there is static sparking or you feel a shock, stop oper-

ation immediately. Do not use equipment until you iden-
tify and correct the problem.

• Keep a working fire extinguisher in the work area.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

• Do not operate the unit when fatigued or under the influ-

ence of drugs or alcohol.

• Do not exceed the maximum working pressure or tem-

perature rating of the lowest rated system component.
See Technical Data in all equipment manuals.

• Use fluids and solvents that are compatible with equip-

ment wetted parts. See Technical Data in all equipment
manuals. Read fluid and solvent manufacturer’s warn-
ings. For complete information about your material,
request MSDS forms from distributor or retailer.

• Check equipment daily. Repair or replace worn or dam-

aged parts immediately with genuine manufacturer’s
replacement parts only.

• Do not alter or modify equipment.
• Use equipment only for its intended purpose. Call your

distributor for information.

• Route hoses and cables away from traffic areas, sharp

edges, moving parts, and hot surfaces.

• Do not kink or over bend hoses or use hoses to pull

equipment.

• Keep children and animals away from work area.
• Comply with all applicable safety regulations.

PRESSURIZED ALUMINUM PARTS HAZARD
Do not use 1,1,1-trichloroethane, methylene chlo-
ride, other halogenated hydrocarbon solvents or flu-

ids containing such solvents in pressurized aluminum
equipment. Such use can cause serious chemical reaction
and equipment rupture, and result in death, serious injury,
and property damage.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment
when operating, servicing, or in the operating area of
the equipment to help protect you from serious
injury. This equipment includes but is not limited to:

• Protective eyewear
• Clothing and respirator as recommended by the fluid and

solvent manufacturer

• Gloves
• Hearing protection

WARNINGS

312830C

IMPORTANT SAFETY INSTRUCTIONS.

Refer to your

sprayer instruction manual for Pressure Relief, priming and
spray instructions. Keep these instructions.

Instructions/Parts

English

This manual is related to the following products:

246506