GE GEK 106168E - Manual (Page 14)

2. OPERATION LOGIC
GEK-106168E DBF Breaker Failure Protection 7
Group Status Comment
5.9
5.10
5.11
5.12
5.13
5.14
5.15
6.0
6.1
Parallel EEPROM Alarm Failure in parallel EEPROM
6.2 Serial EEPROM Alarm Failure in serial EEPROM
6.3 Out-of-Service Relay out of service
6.4 Default General Settings Relay with factory default settings
6.5 Default Table 1 Settings Table 1 with factory default settings
6.6 Default Table 2 Settings Table 2 with factory default settings
6.7 Default Table 3 Settings Table 3 with factory default settings
6.8
6.9
6.10
6.11
52 A Maintenance Alarm Accumulated I2t above limit for Phase A
6.12 52 B Maintenance Alarm Accumulated I2t above limit for Phase B
6.13 52 C Maintenance Alarm Accumulated I2t above limit for Phase C
6.14
6.15
7.0
7.1
Active Table 1 Setting Table #1 is the active Table
7.2 Active Table 2 Setting Table #2 is the active Table
7.3 Active Table 3 Setting Table #3 is the active Table
7.4
7.5
7.6
New Events There are new events stored in the DBF
7.7 Two Stages Set BF Logic set to 2 timed stages
7.8 Breaker Pole A Status CB Pole A Closed
7.9 Breaker Pole B Status CB Pole B Closed
7.10 Breaker Pole C Status CB Pole C Closed
7.11 Latching Relay 1 Status Optional Exp. Board: Latched#1
Closed
7.12 Latching Relay 2 Status Optional Exp.Boar: Latched#2 Closed
7.13
7.14
7.15
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8