GarrettCom P62 User Manual
Page 21
Magnum P62-Series Hardened Switches Installation and User Guide (05/05)
17
www GarrettCom com
.
.
2.5
Features and Benefits
100Mb switching services for high performance Ethernet LANs
Magnum P62-Series Switches provide Fast Ethernet switching on all ports. They
perform high speed filter/forward operations on the traffic, giving each port’s
segment a full 100Mb (or possibly 10 Mb for RJ-45 ports) of bandwidth.
Two “future-proof” fiber ports with SC connectors
Built-in fiber ports may be ordered with 100Mb full-duplex multi-mode SC,
single-mode SC, and (special order) SSCL-type connectors. The fiber ports are set
to full-duplex mode. No Media Converters needed.
All RJ-45 ports are auto-negotiating, support 10/100 full / half duplex
The auto-negotiating RJ-45 ports on P62-Series, with 10 or 100Mb speed and full /
half-duplex mode selected by Ethernet standard IEEE 802.3u
Top-mounted LEDs for convenient viewing
The LEDs that indicate operating status are on the top of the unit for easy viewing
in any situation. As the units are normally vertical for wall- or pedestal-mounting,
top-surface viewing is most convenient.
Installation is “Plug n Play”, operation is transparent to software
The Magnum P62-Series forward packets from each domain that are needed on the
other domains. Internal address tables are self-learning, enabling users to change
port connections or 10/100 domains without affecting operations.
Thermal design enables P62S to be used in temp. uncontrolled applications.
The P62’s advanced thermal technique enclosed in rugged 18-gauge high steel
used as a heat sink, is designed specifically for uncontrolled applications.
24VDC and -48VDC (Int.) & 125V/250VDC (ext.) through PSX-T
The P62-Series switch is designed to support 20-60 VDC auto-ranging power input
(int.) as well as 125V/250VDC through external PSX-T. DC power is highly
reliable and convenient in out-of-the-way locations.
Managed mP62’s with MNS(mP) software for Managed network
The New managed mp62 armed with management functions including SNMP,
QoS, STP, Port based VLAN, Port settings, Password security, BootP / DHCP etc
MTBF over 10+ years, per Bellcore calculation method
for MTBF detail.