GoVideo VR2940 - Manual (Page 25)

25
4 - Recording (cont.)
Timer Recording
Setting a Timer Recording
You can set up to 8 programs to record within
any one-month period.
1 Insert recordable media such as a DVD+R/
RW disc or a blank VHS tape.
2 Press TIMER.
• The Timer Recording menu appears.
3 Use  to move to a timer recording slot,
and press ENTER to modify it.
• If you did not set the clock on the DVD
Recorder+VCR, you must do so before
programming a timer recording.
4 Use the  keys to set the following:
• Media - Choose DVD or VHS.
• Ch. - Choose the desired channel, or
one of the external inputs from which to
record.
• Date - Choose a date up to one month
in advance, or select a daily or weekly
program.
• Start Time - Set the recording start time.
• End Time - Set the recording end time.
• Mode - Choose a Record mode.
DVD: HQ, SP, SLP or EP
VCR: SP, SLP
5 When finished, press ENTER to save your
settings.
• The Timer Record List will appear.
6 Press SETUP to exit the Timer Record List.
7 The Timer indicator on the front panel dis-
play will light or blink.
8 Power Off the DVD Recorder+VCR to start
the Timer Recording.
Timer Recording Notes
• The Timer indicator lights on the front panel
display when the DVD Recorder+VCR is
ready for the Timer Recording and powered
off.
• The disc and tape indicator blink under the
following conditions:
- The DVD Recorder+VCR is not powered
off.
- No recordable tape is inserted.
- Tape and disc timer recordings are
overlapped.
• The DVD Recorder+VCR will record the
audio according to the current TV tuner
setting (Stereo, Mono or SAP). Use the
AUDIO button to set the audio before
switching the DVD Recorder+VCR to
Standby mode.
• The DVD Recorder+VCR will automatically
power off when the Timer Recording ends.
• There is a short delay when a timer
recording finishes to confirm the recorded
program. If two timer recordings are set
to record sequentially (one right after the
other), the very beginning of the later
program may not be recorded.
Canceling a Timer Recording
You can clear a Timer Recording any time
before the recording actually starts.
• Use  to select the program you want
to erase on the Timer Recorder List, then
press ENTER to modify it.
• Use  to select Delete then press
ENTER.
Stopping a Timer Recording in
Progress
After a Timer Recording has started, you
can still cancel the program by pressing and
holding STOP  for 3 seconds.
Timer Recording
��������������������������
������������������������������
������������������������������
������������������������������
������������������������������
������������������������������
������������������������������
������������������������������
������������������������������
������������
���������������������������� 