Epson EH-TW4000 - Manual (Page 9)

7
Part Names and Functions
Remote control
•
Remote control light-emitting area p.13
Outputs remote control signals.
•
Power button p.14, 15
Turns the projector power on/off.
•
Memory button p.24
Saves, loads, and erases memory
contents.
•
Default button p.26
Returns settings of the adjustment
screen in the configuration menu to
their default values when pressed
while displaying the screen.
•
Enter/Line menu button
p.18, 24, 26
Displays the line menu.
While viewing a menu, press this
button to select the menu item and
proceed to the next display.
•
button
p.18, 20, 22, 26
Press to select menu items and
adjustment values.
•
Gamma button p.20
Adjusts the gamma.
•
Sharpness button p.23
Adjusts the image sharpness.
•
Blank button p.26
Turns off and on the projected
images temporarily.
When pressed while displaying
the configuration menu, the menu
screen disappears and appears.
•
Illumination button
Illuminates all of the buttons on the
remote control for 10 seconds so
that they can be seen in dark
places.
•
Color Mode button p.18
Changes the color mode to suit the
projection environment.
•
Aspect button p.18
Changes the aspect ratio to match
the input signal.
•
Esc button
p.18, 20, 26
Returns to the previous menu when
pressed while displaying the menu.
Switches the input source to the
input terminals indicated on each
button.
Source buttons p.15
•
Pattern button p.17
Displays and clears the test pattern.
•
RGBCMY button p.20
Adjusts the hue, saturation and
brightness for each RGBCMY
color.
•
Menu button p.26
Displays and closes the full
configuration menus.