Grandstream Networks BT200 - Manual (Page 5)

C
ONNECTING
Y
OUR
P
HONE
Connecting your BT–200 is easy. Before you begin, please verify the contents of the BT–200 package.
E QUIPMENT P ACKAGING
The BT–-200 phone package contains:
1. One BT–200 Main Case
2. One
Handset
3. One phone cord
4. One Universal Power Adapter
5. One Ethernet cable
C
ONNECT YOUR
P
HONE
Connecting your phone is simple. First, connect the handset to the handset port. Next, connect the
network port on the back of your phone to the Ethernet port on your router using the Ethernet cable
included in your package. Then connect your BT–200 to your PC using the PC port. Lastly, connect your
power supply to your phone and wall outlet. Please ensure your BT-200 has the latest firmware @
http://www.grandstream.com/y-firmware.htm .
F IGURE 1: BT–200 I LLUSTRATION
Headset
Power LAN Port
PC Port
C
ONNECT YOUR
P
HONE TO THE
V
O
IP N
ETWORK
Follow these steps to connect your phone to the VoIP network:
1. Ensure your phone is connected to the Internet and the power socket.
2. Wait 1 minute and press MENU.
3. Press Arrow down 1 time to see on display [2] IP Address
4. Press MENU again to see IP address on display
5. Enter this IP in Internet Explorer browser.
6. Login as administrator (password on default: admin)
a. Type your SIP ID numbers
b. Type your NAME used for Member Login
c. Type your PASSWORD used for Member Login
7. REBOOT the BT–200 phone
Grandstream Networks, Inc. BT-200 User Manual Page 5 of 35
Firmware 1.1.1.14 Last Updated: 12/2006