Advanced user configuration, Igure, Dvanced – Grandstream Networks BT200 User Manual
Page 21: Onfiguration, Creenshot, Able, Evice, Tatus, Efinitions, Grandstream device configuration
T
ABLE
9:
D
EVICE
S
TATUS
D
EFINITIONS
MAC Address
The device ID, in HEX format. This is a very important ID for ISP troubleshooting.
IP Address
This field shows LAN IP address of BT–200
Product Model
This field contains the product model info.
Software Version
Program: This is the main software release. This number is always used for
firmware upgrade. Boot and loader are not normally changed.
System Up Time
This field shows system up time since the last reboot.
Registered
This field indicates whether the device is registered to the SIP server(s).
PPPoE Link Up
This field shows whether the PPPoE connection is up if connected to DSL modem.
Detected NAT
Type
Displays type of NAT the BT–200 is connected to via its LAN port. It is based on
STUN protocol.
A
DVANCED
U
SER
C
ONFIGURATION
To login to the Advanced User Configuration page, please follow the instructions in
to access the login page. The password is case sensitive with a maximum length of 25
characters and the factory default password for Advanced User is “admin”. Advanced User configuration
includes not only the end user configuration, but also advanced configuration such as SIP configuration,
Codec selection, NAT Traversal Setting and other miscellaneous configuration. After login, the
embedded Web server will display the Advanced Configuration page, explained in detail in Table 10:
Advanced Configuration Page Definitions.
F
IGURE
4:
A
DVANCED
U
SER
C
ONFIGURATION
S
CREENSHOT
Grandstream Device Configuration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2005-2006
Grandstream Networks, Inc.
BT-200 User Manual
Page 21 of 35
Firmware 1.1.1.14
Last Updated: 12/2006