GIGABYTE GA-EP45-UD3LR - Manual (Page 72)

GA-EP45-UD3LR/UD3L Motherboard - 72 -
Step 6:
Select Save & Exit Setup and then press to save settings to CMOS and exit BIOS Setup. The
procedure is complete after the system restarts.
Press to load BIOS defaults
Step 4:
Press and then to exit Q-Flash and reboot the system. As the system boots, you should
see the new BIOS version is present on the POST screen.
Step 5:
During the POST, press to enter BIOS Setup. Select Load Optimized Defaults and press
to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we
recommend that you reload BIOS defaults.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
 MB Intelligent Tweaker(M.I.T.)

Standard CMOS Features
 Advanced BIOS Features
 Integrated Peripherals

Power Management Setup
 PnP/PCI Configurations

PC Health Status
ESC: Quit
: Select Item
F11: Save CMOS to BIOS
F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS
Load Optimized Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Load Optimized Defaults (Y/N)? Y