beautypg.com

Installation instructions, Step 4 install anti-tip bracket (cont.) – GE Monogram Built-In All-Refrigerator/Freezer User Manual

Page 14

background image

Installation Instructions

14

STEP 4 INSTALL ANTI-TIP BRACKET

(cont.)

Remove Grilles for Access to Power Cord and Anti-tip
Locking Hooks

Fresh Food Unit
• Open the access door.
• Using a 1/4" hex driver, remove the 2 screws

at the bottom of the grille.

• Pull the bottom of the grille forward, down and out

to remove.

Freezer Unit
• Open the access door.
• Using a 1/4" hex driver, remove the 2 screws

at the bottom of the grille on the right.

• Pull the bottom of the grille forward, down and out

to remove.

• Using a 1/4" hex driver, remove the screw

on the left side of the grille.

• The grille is aluminum and will bend easily. Gently pull

forward on the left side of the grille to open for access.
This grille will not be completely removed.

Power Cord

Locate the power cord inside the left cavity. If it has
not been adjusted so the plug is easily accessible,
do so now.

“L” Bolt

Left Grille Open

Power Cord Location

“L” Bolt

Left Grille Open

Power Cord Location

Move Unit into Final Position
• Move refrigerator toward its final installed location.

Align the tabs on the wall bracket with the openings
in the back of the unit.

• The unit has “L” bolts in the upper left and right

corners inside of the access compartment. These
bolts will interlock with the wall bracket and secure
the unit using the washers and hair pin cotters
in the hardware kit once the unit has been leveled
and is in the final position.

Screws

Screws