Gateway GT5062b - Manual (Page 54)

CHAPTER 4: Upgrading Your Computer
48
5 Unplug the cable from the back of the card reader, then
slide the card reader toward the front of your computer.
6 Slide the new card reader into place, then secure it with
the two screws you removed previously.
7 Plug the cable into the card reader.
8 Place the top bezel on top of the computer, then slide
bezel toward the back of the computer until it clicks into
place.
9 Reinstall the bezel by following the instructions in
“Replacing the front bezel” on page 39 .
10 Reinstall the computer case’s side panel by following
the instructions in
“Replacing the side panel” on
page 40 .
8512243.book Page 48 Monday, February 12, 2007 4:35 PM