Graco 13785-7-00 - Manual (Page 52)

c. While still pinching the straps together, unbuckle
the seat belt. Do not allow the straps to slip.
d. Connect the lap belt to the shoulder belt by
placing the locking clip on the belts about
½ inch from the buckle tongue as shown Ê .
e. Re-buckle the belt and pull hard on the lap belt
to be sure it does not move.
f. Repeat this procedure if the lap belt is loose or lengthens when pulled.
13. If you are using the base, make sure that
there is nothing on top of or in the base that
may interfere with attachment of the safety seat.
Then push the safety seat down into the base
and make sure that you hear a “click” Ë .
Pull up on the safety seat to be sure it is latched
securely into the base.
If the safety seat does not securely latch into
the base, the safety seat provides NO protection
for your child. DO NOT use the safety seat/base
if the safety seat does not securely latch into
the base.
48
½
inch
К
Л