GE Z-14400 - Manual (Page 112)

Z Series RO System by GE Osmonics
GRIP ON TUBE , ALLOWING DISENGAGEMENT.
TIGHT AGAINST FITTING BODY. COLLET TEETH WILL RELEASE
TO DISENGAGE TUBE, REMOVE LOCKING CLIP AND PUSH COLLET
INTO FITTING AGAIN TO ENSURE COMPLETE INSERTION.
BODY TO PREVENT ACCIDENTAL RELEASE OF TUBE. PUSH TUBE
ATTACH LOCKING CLIP BETWEEN COLLET FLANGE AND FITTING
TEETH THAT GRIP TUBE.
"O" RING PROVIDES SEAL. COLLET HAS STAINLESS STEEL
CONTRIBUTE TO LEAKAGE. INTERNAL COMPONENT REPLACEMENTS ARE NOT
LEAKS, CHECK FOR IMPROPER TUBE INSERTION OR TUBE ROUTING THAT MAY
NOTE: FITTING IS NOT DESIGNED TO BE DISASSEMBLED. IF THE FITTING
PUSH TUBE INTO FITTING TO SECURE.
AVAILABLE.
"PUSH−IN" FITTNGS
“Push-In” Fitting Instructions
1238339b – 16Oct03 6 - 28 Drawings