3 connecting the administration console, Connecting the administration console – FUJITSU SPARC M4000/M5000 User Manual

Page 29

Chapter 3

Installing the Server

3-5

3.3

Connecting the Administration Console

The serial port on the XSCF Unit is a RJ-45 interface port used to monitor the boot
process and to modify the default settings. The port is monitored and configured
using an administrative console connected to the serial port by a serial cable.

You can monitor and configure the XSCF Unit using any one of the following devices
as the administrative console:

■

ASCII terminal

■

Workstation

■

Terminal server (or patch panel connected to a terminal server)

■

Personal computer

Note –

It is possible to connect to the LAN ports using Telnet or ssh access. The

LAN ports have class-B private address values but they will not send out a packet by
themselves until configured.

Note –

The modular connector (RCI connector) is not for connection to TNV circuits

See item 1 in

FIGURE 3-2

shows the locations of the ports on the XSCF Unit.