Set-up – FujiFilm F450 User Manual
Page 31
61
Settings
4
60
■ SET-UP menu options
SET-UP
F USING THE SET-UP SCREEN
●
!
Always turn the camera off when replacing the battery.
Opening the battery cover or disconnecting the AC power
adapter without turning the camera off may cause the camera
settings to revert to the factory default values set at shipment.
1 Press the “MENU/OK” button to display the
menu on the LCD monitor.
2 Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “SET-UP”.
3 Press the “MENU/OK” button to display the
SET-UP screen.
Press “d” or “c” to move to options 1 to 4.
After you have changed the settings, press the
“MENU/OK” button to confirm the changes.
1 Press “a” or “b” to select a menu option.
2 Press “d” or “c” to change the setting.
Press “c” for “FORMAT”, “DATE/TIME”, “TIME
DIFFERENCE” or “q RESET”.
3
4
0
1
0
2
0
1
0
2
0
3
1
2
IMAGE DISP.
1
2
3
4
ON/OFF
ON
Specifies whether an image checking screen (photography
result) appears after taking a picture.
The image appears for a few moments and is then recorded.
–
62
62
–
–
–
16
63
64
76
75
82
–
17
–
–
POWER SAVE
2 MIN/5 MIN/OFF
2 MIN
Reduces the camera’s power consumption and
subsequently turns the camera off when not being used.
FORMAT
OK
–
Erases all files.
q LCD
ON/OFF
ON
Specifies whether the LCD monitor is ON or OFF when the
camera is turned on in Photography mode.
§ BEEP
OFF/1/2/3
2
Sets the volume of the tone emitted when the camera
controls are used.
§ SHUTTER
OFF/1/2/3
2
Sets the volume of the sound emitted when the shutter
operates.
DATE/TIME
SET
–
Corrects the date or time.
TIME
DIFFERENCE
SET
–
Specifies the time difference settings.
FRAME NO.
CONT./RENEW
CONT.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
USB MODE
¶/qWEB/®
¶
¶
: DSC (Mass storage device) mode
This mode provides a simple way to read images from an
xD-Picture Card and store images onto an xD-Picture
Card.
q
WEB: WEB CAM (WEB Camera) mode
This function allows you to conduct videoconferencing
sessions between PCs connected to the Internet.
✽ Windows XP SP1 only
®
: PictBridge
If a printer that supports PictBridge is available, images can
be printed by connecting the camera directly to the
PictBridge-compatible printer without using a computer.
START-IMAGE
ON/OFF
OFF
Specifies whether the startup screen appears on the LCD
monitor when the camera is turned on.
ENGLISH
Specifies the language used for LCD monitor display.
VIDEO SYSTEM
NTSC/PAL
–
Specifies whether video output is set to NTSC or PAL.
q RESET
OK
–
Resets all the camera settings (other than the DATE/TIME,
TIME DIFFERENCE, LANG. and VIDEO SYSTEM) to the
factory default values set at shipment. A confirmation
message appears when you press “c”. To reset the camera
settings, press the “MENU/OK” button again.
Settings
Display
Factory default
Explanation
page