Fluke HART SCIENTIFIC 1502A - Manual (Page 31)

27
7 Digital Communications Interface
Remote Commands
Command Description
Measurement Commands
T read measurement (includes label, unit, and time)
F[ETCH?] read measurement value (SCPI compatible)
SA[=[[[hh:]mm:]ss] read [or set] serial sample period
U=C|F|K|O select units
ST[=ON/OF] read [or set] the time stamp
CL[=hh:mm:ss] read [or set] the system clock
Probe Characterization Commands
PR[=90|68|R|S] read [or select] the characterization type
R0[=] read [or set] R0 or R(0.01°C) depending on the selected characterization
AL[=] read [or set]
α for the Callendar-Van Dusen or IPTS-68 characterization
DE[=] read [or set]
δ for the Callendar-Van Dusen or IPTS-68 characterization
BE[=] red [or set] β for the Callendar-Van Dusen characterization
A4[=] read [or set] a
4
for the ITS-90 or IPTS-68 characterization
B4[=] read [or set] b
4
for the ITS-90 characterization
C4[=] read [or set] c
4
for the IPTS-68 characterization
A n[=] read [or set] a
6
, a
7
, a
8
, a
9
, a
10
, or a
11
for the ITS-90 characterization
B n[=] read [or set] b
6
, b
7
, b
8
, or b
9
for the ITS-90 characterization
C n[=] read [or set] c
6
or c
7
for the ITS-90 characterization
D6[=] read [or set] d
6
for the ITS-90 characterization
SC[=68/90] read [or set] IPTS-68 scale conversion
CO= test resistance to temperature conversion
Sample Parameter Commands
FI[=] read [or set] filter time constant
CU[=] read [or set] probe current
PS[= read [or set] the power saver period
Communication parameter commands
DU[=F/H] read [or set] serial sample duplex mode
LF[=ON/OF] read [or set] serial linefeed
Table 6 Command List