Fluke HART SCIENTIFIC 1502A - Manual (Page 18)

5.2 Rear Panel
See Figure 3 .
Serial Port - The DB-9 connector is for interfacing the thermometer to a com-
puter or terminal with serial RS-232 communications.
Probe Connector - At the rear of the thermometer is the probe connector. The
probe must be connected for operation.
Power Switch - The power switch is located on the rear of the thermometer.
The AC power switch turns the unit on and off.
AC Power - At the rear of the instrument is the removable power cord that
plugs into a standard 115 VAC grounded socket. (230 VAC optional)
IEEE-488 Port (optional) - The GPIB connector is for interfacing the ther-
mometer to a computer or terminal with IEEE-488 communications.
1502A Thermometer Readout
User’s Guide
14
RS-232
IEEE-488
PROBE
POWER
l
201811
FLUKE CORPORATION
HART SCIENTIFIC DIVISION
www.hartscientific.com
115 VAC 50/60 Hz 10 W
NO USER SERVICABLE PARTS
Figure 3 1502A Back Panel