Foundry Networks AR3202-CL - Manual (Page 44)

Policy Commands
June 2004 © 2004 Foundry Networks, Inc. 3 - 21
configure policy route_map set origin
This command configures the origin value for the BGP route.
Parameter Description
syntax:
[ no ] set origin origin < egp | igp | incomplete >
example:
Foundry-AR1208/configure/policy/route_map Block100 1# set origin igp
applicable systems:
All models.
related commands:
origin
egp EGP protocol
igp IGP protocol
incomplete Unknown protocol type
configure policy route_map set origin egp
configure policy route_map set origin igp
configure policy route_map set origin incomplete