Router1/configure# interface bundle wan1, Configuring new bundle, Router1/configure/interface/bundle wan1# link t1 1 – Foundry Networks AR3202-CL User Manual

Page 263: Router1/configure/interface/bundle wan1# exit, Router1/configure# interface ethernet 0, Configuring existing ethernet interface, Router1/configure/interface/ethernet 0# exit

Foundry AR-Series Router User Guide

15 - 38

June 2004

Figure 15.3

IPSec Tunneling Using Mode Configuration Method

Step 1: Configure a WAN bundle of network type untrusted:

Step 2: Configure the Ethernet interface with trusted network type:

Router1/configure# interface bundle wan1

Configuring new bundle

Router1/configure/interface/bundle wan1# link t1 1

Router1/configure/interface/bundle wan1# encapsulation ppp

Router1/configure/interface/bundle wan1# ip address 172.16.0.1 24

Router1/configure/interface/bundle wan1# crypto untrusted

Router1/configure/interface/bundle wan1# exit

Router1/configure# interface ethernet 0

Configuring existing Ethernet interface

Router1/configure interface/ethernet 0# ip address 10.0.1.1 24

Router1/configure/interface/ethernet 0# crypto trusted

Router1/configure/interface/ethernet 0# exit

This manual is related to the following products: