Foundry Networks AR3202-CL - Manual (Page 134)

OSPF Configure Commands
June 2004 © 2004 Foundry Networks, Inc. 9 - 23
configure router ospf interface
This command configures an interface for OSPF routing.
Parameter Description
syntax:
[ no ] interface < name > [ dlci < n > ] [ < area _id > ]
NOTE: When the “ospf” interface is created for the first time, area id must be specified. Thereafter, it is optional.
example:
Foundry-AR1208/configure/router/ospf# interface Toronto 5
related commands:
applicable systems:
All models.
name Enter an interface name, such as ethernet0, ethernet1, or a bundle
name.
dlci Data link connection identifier of the pvc (for frame relay use).
The range is 16 - 1022; there is no default.
area_id OSPF area ID
Enter either a decimal number or an IP address.
configure router ospf 1583Compatibility
configure router ospf area
configure router ospf distance
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface hello_interval
configure router ospf interface neighbor
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface priority
configure router ospf redistribute
configure router ospf ref_bw
configure router ospf interface retransmit_interval
configure router ospf timers
configure router ospf interface transmit_delay