Foundry Networks AR3202-CL - Manual (Page 139)

Foundry AR-Series Router User Guide
9 - 28 © 2004 Foundry Networks, Inc. June 2004
configure router ospf interface neighbor
This command sets up an OSPF neighbor router for an interface that is used on a non-broadcast network.
Parameter Description
syntax:
[ no ] neighbor < IP address > [ priority < n > ]
example:
Foundry-AR1208/configure/router/ospf/interface toBoston# neighbor 100.22.12.2 7
related commands:
applicable systems:
All models.
ip address The IP address of the neighbor router
priority Sets the router priority for a non-broadcast neighbor.
The range is 0 - 255; the default is 1.
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface hello_interval
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface priority
configure router ospf interface retransmit_interval
configure router ospf interface transmit_delay