Foundry Networks AR3202-CL - Manual (Page 138)

OSPF Configure Commands
June 2004 © 2004 Foundry Networks, Inc. 9 - 27
configure router ospf interface hello_interval
This command sets the time interval, in seconds, between the hello packets that are sent on the interface.
Parameter Description
syntax:
[ no ] hello_interval < n >
example:
Foundry-AR1208/configure/router/ospf/interface toBoston# hello_interval 30
related commands:
applicable systems:
All models.
hello_interval Time in seconds
The default is 10; the range is 1 - 65535.
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface neighbor
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface priority
configure router ospf interface retransmit_interval
configure router ospf interface transmit_delay