Faria Instruments NMEA2000 - Manual (Page 18)

Page 15
Repeat for remaining Screens (2, 3, etc)
Press “Mode” to return to the “Edit” mode.
Press “Up” or “Down” to select another function or “Mode”
to return to “Normal” mode
Select Gauge Range (dial reading range)
1 Select
Gauge
Range
2
3
Press and hold “Up” and “Down” for 2 seconds to “Select
Gauge Range.”
Press “Up” or “Down” to select another function.
Select “Oil Pressure Dial”
1 Select
Oil Pressure
Dial
2
3
Press and hold “Up” and “Down” for 2 seconds to select
“Oil Pressure Dial.”
Press “Up” or “Down” to select another “Gauge Range.”
Press “Mode” to return to “Edit” mode.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold “Up” and “Down” for 2 seconds to save the
selection and return to “Gauge Range” selection.
1
Select
Oil Pressure
Dial
100 psi
> 60 psi
80 psi
2
3
4
5
6
Select “Coolant Temperature Dial”
1 Select
Coolant Temp
Dial
2
3
Press and hold “Up” and “Down” for 2 seconds to select
“Coolant Temp Dial.”
Press “Up” or “Down” to select another “Gauge Range.”
Press “Mode” to return to “Edit” mode.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold “Up” and “Down” for 2 seconds to save the
selection and return to “Gauge Range” selection.
1 Select
Coolant Temp
Dial
100 – 250 F
> 60 – 220 F
2
3
4
5
Select “Voltmeter Dial”
1 Select
Voltmeter
Dial
2
3