FUJITSU SPARC M9000 User Manual
Page 3
Installation Steps for SPARC Enterprise M8000/M9000 Servers
Step 1
• Check the power source, air conditioning equipment, and location of the installation site.
For details, see the SPARC Enterprise M8000/M9000 Servers Site Planning Guide.
Step 2
• Unpack the product package by referencing the SPARC Enterprise M8000/M9000 Servers
Unpacking Guide, which comes with the server.
Step 3
• Install the main unit. If there is an expansion cabinet to be connected to the SPARC Enterprise
M9000 or a power supply cabinet to be mounted in the SPARC Enterprise M8000 or SPARC
Enterprise M9000, connect each of them to the relevant cabinet. For details, see the SPARC
Enterprise M8000/M9000 Servers Installation Guide.
Step 4
• Connect the input power cables to the main unit. For details, see the SPARC Enterprise
M8000/M9000 Servers Installation Guide.
Step 5
• Connect the console to the main unit. For details, see the SPARC Enterprise M8000/M9000
Servers Installation Guide.
Step 6
• Turn on the main line switch of the main unit. For details, see the SPARC Enterprise M8000/
M9000 Servers Installation Guide.
Step 7
• Set necessary information for hardware. For details, see the SPARC Enterprise M8000/M9000
Servers Installation Guide.
Step 8
• Turn on the power to the main unit. POST is automatically executed after power-on. For
details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
Step 9
• Set a LAN port on the XSCF unit and connect it. For details, see the SPARC Enterprise
M8000/M9000 Servers Installation Guide and the SPARC Enterprise M4000/M5000/M8000/
M9000 Servers XSCF User’s Guide.
Step 10
• If you are installing other peripheral devices in the main unit, proceed to Step 11.
• If you are not installing peripheral devices in the main unit, proceed to Step 14.
Step 11
• Turn off the power to the main unit. For details, see the SPARC Enterprise M8000/M9000
Servers Installation Guide.
Step 12
• Install other peripheral devices. For details, see manuals supplied with each peripheral
device.
Step 13
• Turn on the power to the main unit. POST is automatically executed after power-on. For
details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
Step 14
• Check the network connection of domain. For details, see the SPARC Enterprise M8000/
M9000 Servers Installation Guide.
Step 15
• Confirm the operation by using SunVTS. For details, see the SPARC Enterprise M8000/
M9000 Servers Installation Guide and the SunVTS User's Guide
.
Step 16
• Perform the setup required for the operation of the system. For details, see the SPARC
Enterprise M4000/M5000/M8000/M9000 Servers Administration Guide.
Notes:
We recommend you to install Enhanced System Facility (ESF) and apply PTF for safe
operation of the system. See the following
website
for details.
http://www.fujitsu.com/sparcenterprise/manual