5 setting measuring depths – Furuno CI-68 User Manual

Page 18

Text mode
Original mode

1. OPERATIONAL OVERVIEW

1-8

1.5 Setting

Measuring

Depths

Set the depths at which you wish to measure tide speed and direction as below. Note that
layer 3 cannot be set when BTM TIDE TRACK in the MENU 1 menu is set to ON.

1. Press the [LYR1], [LYR2] or [LYR3] key as appropriate to show the depth setting

window.

SETTING DEPTH (LAYER1)

m (2-400)

KNOB OR CURSOR PAD: CHANGE SETTING

Depth setting window

2. Within five seconds after completing step 1, operate the Setting Knob or the CursorPad

to set depth of measurement. The setting range is 2-400 (meters).

Setting Knob: Rotate clockwise to raise the range; counterclockwise to lower the range.
CursorPad: Press

► or ▲ to raise the range; ► or ▼ to lower the range.