Record and playback with the fs-100, Power on the fs-100 – FOCUS Enhancements DVCPRO50 User Manual
Page 40
![background image](/manuals/104597/40/background.png)
Quickstart
22
FS-100 Portable DTE Recorder
Record and Playback with the FS-100
Before using the FS-100, set up the unit as outlined in the following
sections:
Power On the FS-100 .......................................................... 22
Select HDD Recorder Mode ................................................ 23
Select a DV File Format ...................................................... 24
Set Time and Date .............................................................. 25
Record With the FS-100 ...................................................... 27
Manual Recording ............................................................... 29
Syncro Slave ....................................................................... 30
Tapeless .............................................................................. 31
Playback on the FS-100 ...................................................... 32
The values set in these procedures are fixed and persist through
power cycles. To change them, repeat the steps outlined above.
Power On the FS-100
Step 1:
Press the
Power ON
button for two seconds and release it.
Power ON
(Reset)
OFF (STOP)
To power OFF,
hold down for 3-5 seconds.
Navigation
Buttons
Transport
Buttons
Play