FujiFilm FinePix 420 - Manual (Page 34)

67
Software
Installation
66
8 Click the [Continue] button in the “Software License Agreement” window.
FinePixViewer and RAW FILE CONVERTER LE are installed on Mac OS X.
1 Turn your Macintosh on and start up Mac OS X. Do not launch any other applications.
2 Insert the enclosed CD-ROM into the CD-ROM
drive. The “FinePix” window opens.
● ! If the “FinePix” window does not open automatically, double-
click the CD-ROM icon.
3 Double-click “Installer for MacOS X”.
4 Click the “ ” icon.
(This operation is not required on version 10.2 (or
later).)
5 Enter the administrator name and password. Then
click the [OK] button.
● ! The window displayed in Mac OS X is slightly different.
6 Click the [Continue] button.
7 Quit any other programs that are running and then click the [Continue] button.
5.4 INSTALLATION ON A Mac OS X
Pre-installation checklist
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
Compatible Mac Power Macintosh G3 ✽1 , PowerBook G3 ✽1 ,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, or PowerBook G4
Operating System Mac OS X (compatible with version 10.1.5 to 10.2.6)
RAM 192 MB minimum, 256 MB or more recommended
Hard disk space Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 for FinePix: 2 GB or better)
Display 800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 for FinePix: 1024 × 768 or better)
Internet connection ✽2 i To use the FinePix Internet Service or mail attachment function
An Internet connection and e-mail transmission software
i Connection speed: 56k or better recommended
■ Hardware and software requirements
✽1 Models with a USB port as a standard feature
✽2 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
■ Functions not supported in FinePixViewer for Mac OS X
Function Comment
PC Camera
Online updating
Not supported.
Information on updates can not be obtained using [Support] in the Internet menu.
◆
Notes
◆
i Connect the camera directly to the Macintosh using the USB cable (included). The software may not
operate correctly if you use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i On Macintosh computers, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER
LE is used. If other applications will be used at the same time, allocate the additional amount required
for those applications also.
Continued