FujiFilm FinePix 420 - Manual (Page 23)

45
Advanced Features
44
FRAME
1 Press “d” or “c” to select the frame (file) to be
erased.
2 Press the “MENU/OK” button to erase the
currently displayed frame (file).
To erase another image, repeat steps 1 and 2.
When you have finished erasing images, press the
“BACK” button.
● ! Pressing the “MENU/OK” button repeatedly erases
consecutive images. Take care not to erase an image by
mistake.
● ! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (
➡P.46).
ALL FRAMES
Pressing the “MENU/OK” button erases all the
frames (files).
● ! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (
➡P.46).
0 1 0 2
◆
To stop the procedure mid-way
◆
Press the “BACK” button to stop erasing all the
frames (files). Some unprotected frames (files) will
be left unerased.
If the “
†
” message appears, press the “MENU/OK” button again to erase the
frames (files).
● ! Even if you stop the procedure immediately, some frames
(files) will be erased.
1 1 Set the Mode switch to “w”.
2 Press the “MENU/OK” button to display the
menu on the LCD monitor.
1 Press “a” or “b” to select “ALL FRAMES” or
“FRAME”.
2 Press the “MENU/OK” button.
2
3
0 1
0 2
0 2 0 1
o ERASING SINGLE / ALL FRAMES
PLAYBACK MENU
Note that mistakenly erased images cannot be
recovered. Please copy important frames (files)
that you do not want to be erased to your computer
or another media.
Press “d” or “c” to select “o” ERASE.
ALL FRAMES
Erases all unprotected frames (files).
Copy important frames (files) that you do not want to
be erased to your computer or another media.
FRAME
Erase only the selected frame (file).
¡BACK
Returns to playback without erasing any frames
(files).