FujiFilm FinePix 420 - Manual (Page 10)

19
Using
the Camera
18
Press this button to stop a
procedure midway through.
In the OWNER’S MANUAL the up, down, left and right directions on the 4-direction button are
indicated by black triangles. Up or down is shown as “a” or “b”, and left or right is shown as
“d” or “c”.
0 Using the Menus
0 BACK button
1Display the menu.
Press the “MENU/OK” button.
4Confirm the setting.
Press the “MENU/OK” button.
2Select a menu option.
Press the left or right arrow “d” or “c”
on the button.
3Select a setting.
Press the up or down arrow “a” or “b”
on the switch.
0 a( )b( ) switch
Slide the Mode switch to change modes.
Still photography mode: Still image shooting.
Playback mode: Photographed image playback.
Movie mode: Movie recording.
Press this button to select the LCD monitor
display.
Photography: Turns the LCD monitor on
and off or displays the
framing guides.
Playback: Turns text display on and off or
selects multi-frame playback.
Photography: ab switch
Presses “ ” to zoom in
(telephoto).
Presses “ ” to zoom out
(wide-angle).
Playback: ab switch (Panning frames (files))
Presses “ ” to enlarge the image.
Presses “ ” to revert to normal
display.
0 dc button
Photography: d button
Turns Macro ( ) on and off.
c button
Sets the flash ( ).
Playback: Changes frame or (in a movie)
frame advance.
0 Changing modes
0 DISP button
Photography: Selects the quality (number
of recorded pixels),
sensitivity and FinePix
COLOR setting.
Playback: Specifies the print order
(DPOF) settings.
0 Photo mode ( ) button
BASIC OPERATION GUIDE
2 Using
the Camera
You’ve read the chapter on getting ready and the camera is now set up and ready to take pictures.
“Using the Camera” describes the basic camera operations of “Taking Pictures”, then “Viewing Images”
and “Erasing Images”.
This section describes the camera’s functions.