Furuno FAR2167DS-BB - Manual (Page 71)

4-16
4.4 BNC Connector Converter
To connect the FURUNO Voyage Data Recorder VR-5000 to this radar, the DVI-RGB conversion
kit (mentioned at previous paragraph) and the BNC connector converter are required. Also VGA
cable (between the processor unit and the BNC connector converter) and five 75 ohm coaxial
cables (between the BNC connector converter and VR-5000) are required.
Connecting VR-5000 to FAR-2167DS(-BB) via BNC connector converter
BNC connector converter
VR-5000
DATA COLLECTING
UNIT FAR-2167DS(-BB)
PROCESSOR UNIT
DVI-RGB
Conversion kit
D-sub 15P
Female
VGA cable
75 W coax. cable
VD1
R
G
B
HS
VS
R
G
B
H
V
D-sub 15P
Male
BNC CONNECTOR
CONVERTER
DSUB-BNC-1