Finisar AN-2030 - Manual (Page 7)

AN-2030: Digital Diagnostic Monitoring Interface for Optical Transceivers
F i n i s a r
9/26/02 Revision D Page 7
Transceiver 1
The following bit significant indicators define the electronic or optical interfaces that are 2
supported by the transceiver. At least one bit shall be set in this field. For Fibre Channel 3
transceivers, the Fibre Channel speed, transmission media, transmitter technology, and 4
distance capability shall all be indicated. The SONET Compliance Codes are described 5
in more detail in table 3.4a. 6
Table 3.4: Transceiver codes 7
8
Data
Addr
Bit
1
Description of transceiver Data
Addr
Bit
1
Description of transceiver
Reserved Standard Compliance Codes Fibre Channel link length
3 7-0 Reserved 7 7 very long distance (V)
4 7-5 Reserved 7 6 short distance (S)
SONET Compliance Codes 7 5 intermediate distance (I)
4 4 SONET reach specifier bit 1 7 4 long distance (L)
4 3 SONET reach specifier bit 2 Fibre Channel transmitter technology
4 2 OC 48, long reach 7 3-2 Reserved
4 1 OC 48, intermediate reach 7 1 Longwave laser (LC)
4 0 OC 48 short reach 7 0 Electrical inter-enclosure (EL)
5 7 Reserved 8 7 Electrical intra-enclosure (EL)
5 6 OC 12, single mode long reach 8 6 Shortwave laser w/o OFC (SN)
5 5 OC 12, single mode inter. reach 8 5 Shortwave laser w/ OFC (SL)
5 4 OC 12 multi-mode short reach 8 4 Longwave laser (LL)
5 3 Reserved 8 0-3 Reserved
5 2 OC 3, single mode long reach
5 1 OC 3, single mode inter. reach Fibre Channel transmission media
5 0 OC 3, multi-mode short reach 9 7 Twin Axial Pair (TW)
9 6 Shielded Twisted Pair (TP)
9 5 Miniature Coax (MI)
Gigabit Ethernet Compliance Codes 9 4 Video Coax (TV)
6 7-4 Reserved 9 3 Multi-mode, 62.5m (M6)
6 3 1000BASE-T 9 2 Multi-mode, 50 m (M5)
6 2 1000BASE-CX 9 1 Reserved
6 1 1000BASE-LX 9 0 Single Mode (SM)
6 0 1000BASE-S X
Fibre Channel speed
10 7-5 Reserved
10 4 400 MBytes/Sec
10 3 Reserved
10 2 200 MBytes./Sec
10 1 Reserved
10 0 100 MBytes/Sec
1
Bit 7 is the high order bit and is transmitted first in each byte.