FujiFilm FinePix A205S - Manual (Page 21)

41
Advanced Features
40
● ! By selecting the “WITH DATE” setting, you can have the date
imprinted on your shots when you use the Print Service or a
DPOF-compatible printer. (Depending on the printer
specifications, the date may not be printed in some cases.)
5 Always press the “MENU/OK” button when you
complete the settings.
Pressing the “BACK” button, no DPOF settings are
specified.
3 1 Press “a ” or “b ” to select “WITH DATE” or
“WITHOUT DATE”. By selecting the “WITH
DATE”, the date is imprinted on your prints.
2 Press the “MENU/OK” button.
0 1 0 2
◆
When DPOF settings were specified on another camera
◆
When the data includes a frame with DPOF setting
that were specified on another camera,
“
¥
” appears.
Pressing the “MENU/OK” button erases all of the DPOF
settings already specified for each frame. You must
then specify the DPOF setting for each frame again.
● ! Press the “BACK” button to leave the previous settings
unchanged.
4 1 Press “d” or “c” to display the frame (file) for
which you want to specify DPOF settings.
2 Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1
and 2.
● ! You can order prints of up to 999 image frames on the same
xD-Picture Card.
● ! DPOF settings cannot be specified for movies.
0 1 0 2
Pressing the “BACK” button during the settings, all
the new settings are cancelled. If there were
previous DPOF settings, only the modifications are
cancelled.
Setting for
that frame
Total number
of prints
◆
Cancelling a frame
◆
To cancel the DPOF setting for a frame you have
specified (cancel frame), perform steps
1 to 3 and
then 1 press “d” or “c” to select the frame with
the DPOF setting you want to cancel and then 2
set the number of prints to 0 (zero). To cancel the
DPOF setting for another frame, repeat steps 1
and 2. When you have completed the settings,
you must press the “MENU/OK” button.
u DPOF SET FRAME
PLAYBACK MENU
2 Press “d” or “c” to select “u” DPOF.
1 Turn the Mode switch to “w”.
2 Press the “MENU/OK” button.
4
3
A confirmation message appears.
To reset all the DPOF settings, press the
“MENU/OK” button.
1
0 1 0 2
RESET ALL
1 Press “a” or “b” to select “RESET ALL”.
2 Press the “MENU/OK” button.
0 1 0 2