FujiFilm FinePix A205S - Manual (Page 20)

39
Advanced Features
38
FRAME
1 Press “d” or “c” to select the frame (file) to be
erased.
2 Press the “MENU/OK” button to erase the
currently displayed frame (file).
To erase another image, repeat steps 1 and 2.
When you have finished erasing images, press the
“BACK” button.
● ! Pressing the “MENU/OK” button repeatedly erases
consecutive images. Take care not to erase an image by
mistake.
● ! Protected frames (files) cannot be erased. Unprotect the
frames before erasing them (
➡P.42).
ALL FRAMES
Pressing the “MENU/OK” button erases all the
frames (files).
● ! To cancel the erasing of frames once it is in progress, press
the “BACK” button. Even if you stop the procedure
immediately, some frames (files) will be erased.
● ! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (
➡P.42).
◆
To stop the procedure mid-way
◆
Press the “BACK” button to stop erasing all the
frames. Some unprotected frames (files) will be left
unerased.
0 1 0 2
If the “
†
” message appears, press the “MENU/OK” button again to erase the
frames (files).
● ! Even if you stop the procedure immediately, some frames
(files) will be erased.
1 Turn the Mode switch to “w”.
2 Press the “MENU/OK” button.
2 Press “d” or “c” to select “u” DPOF.
1
0 1 0 2
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
an xD-Picture Card. The recorded specifications include information on which frames
are to be printed.
This section gives a detailed description of how to order your prints with the FinePix
A205/A205S/A210.
On the FinePix A205/A205S/A210, you can specify multiple prints per image.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
≤
« ( ➡P.38)
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥
( ➡P.40)
If you insert an xD-Picture Card that contains frames specified for printing on
another camera, those print specifications are all reset and replaced by the new print
specifications.
“
( ➡P.73)
Up to 999 frames can be specified on the same xD-Picture Card.
HOW TO SPECIFY PRINT OPTIONS (DPOF)
HOW TO SPECIFY PRINT OPTIONS (FRAME SET/RESET)
u DPOF SET FRAME
PLAYBACK MENU o ERASING SINGLE/ALL FRAMES
PLAYBACK MENU
Continued