Furuno color video plotter GD1720C - Manual (Page 16)

1. OPERATIONAL OVERVIEW
1-3
1.1.2 Remote controller
SAVE
RANGE DISP MOB
ABC 1 DEF 2 GHI
MNO 4 JKL
STU 7 VWX
6 5
9 8 YZ&
PQR
0 GAIN ’# EBL/VRM
ENT
WPT
MARK
ENT
CNTL
CENTER
ALARM
SK3 SK1 SK2
HIDE/SHOW
SK4 SK5
TX/STBY BRILL
CLEAR
TONE
MENU
ACQ
3
Operating distance
90
°
: Up to 5 m
±
45
°
: Up to 3 m
Replace the batteries (AA) when the
distance from which the display
unit can be operated shortens.
Note: The remote controller may
become damaged if dropped.
Mishandling of the remote
controller is not covered by
the warranty.
Remote controller
.
Key Function Key Function
RANGE Same as RANGE key on
display unit.
ENT Same as ENTER knob on
display unit.
DISP Same as DISP key on
display unit.
CLEAR Same as CLEAR key on
display unit.
SAVE MOB Same as SAVE/MOB key on
display unit.
MENU Same as MENU key on
display unit.
Ten keys Enter alphanumerics. BRILL Adjusts display brilliance.
EBL/VRM Same as EBL/VRM key on
display unit.
TONE Not used.
GAIN Same as GAIN key on
display unit.
TX/STBY Toggles radar between
standby and transmit.
WPT Displays “alphabet” WPT list
on plotter display.
ACQ Acquires radar target.
(Requires radar source
equipped with ARP.)
MARK ENT Same as MARK ENTRY soft
key.
ALARM Same as ALARM key on the
display unit.
CENTER Returns own ship to screen
center on plotter display.
HIDE/SHOW Same as HIDE/SHOW key
on display unit.
CNTL Switches control between
displays on combination
displays.
SK1 – SK5
(soft keys)
Same as soft keys on display
unit.