FUJITSU TeamPoS 7000 - Manual (Page 34)

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
Chapter 4 - Daily Maintenance TeamPoS 7000 User Guide
32 - Cleaning the Equipment TeamPoS7000_User Guide_D900000454.pdf
4.1.2 Cleaning the magnetic card reader (option)
The read head of the magnetic card reader can become severely soiled with use. If you continue
to use a magnetic card reader with a dirty read head, the reader may fail to read data correctly.
Clean the read head at regular intervals (about once every two months).
Use a cleaning card to clean the head. Using the same procedure as that for reading a magnetic
card, slide the cleaning card through the reader four to five times for each side. Note that the
magnetic card reader is optional.
NOTE: Use of the Fujitsu cleaning card (Product number D99L-1001-0060)
is recommended.
4.1.3 Cleaning the printer
Clean the printer at regular intervals (roughly about once every six months). If not kept clean,
paper debris and dust are likely to accumulate, which may degrade the print quality and/or
cause paper jams.
To clean the printer, remove the printer head cover (see “Cleaning the print head and roller”).
and remove any debris in the printer.
Do not touch the print head immediately after printing. Allow it to cool before
attempting to clean it.
4.1.4 Cleaning the print head and roller
Use a wet cloth with alcohol (ethyl alcohol) or a light cleaning solution which is squeezed
tightly, or just use a dry cloth. Do not allow any liquids to enter the device in order to prevent
damage occurring to the device when you use cleaning liquid and do not use volatile materials
such as thinner or benzene because such materials may cause corrosion or remove color from
the frame.