FUJITSU TeamPoS 7000 - Manual (Page 15)

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
Overview Chapter 1 - Overview
Revision 1.0 - March 6, 2012 AIO Peripherals - 13
1.2.13 Connectors
The connectors, which are located underneath the monitor behind the LEDs and buttons, are
identified below.
1.2.14 Limited Power Source
External VGA (optional
Customer Monitor)
LAN USB
(x2)
Cash Drawer
GND
DC
Power In
AIO Countertop
Mount Expansion
Option only
(do not use for
other peripherals)
24V PUSB
(usually printer)
Cash Drawer
(1 or 2)
Audio
Line Out
12V PUSB (VFD, Second
Monitor, or other 12V power)
Caution: The 24V powered USB port on the terminal does not meet
UL limited power source (LPS) requirements. This port is limited to
only allowing 24V Retail POS powered USB peripherals that do not
exceed a rated current of 4 Amps and are provided with a molded
plastic Fire Enclosure, Rated Min. 94V-1 or Metal enclosure.
Caution: The 24V powered Cash Drawer port on the terminal does
not meet UL limited power source (LPS) requirements. This port is
limited to only allowing 24V Retail POS peripherals that do not
exceed a rated current of .2 Amps and are provided with a molded
plastic Fire Enclosure, Rated Min. 94V-1 or Metal enclosure.