FUJITSU TeamPoS 7000 - Manual (Page 14)

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
Chapter 1 - Overview TeamPoS 7000 User Guide
12 - AIO Peripherals TeamPoS7000_User Guide_D900000454.pdf
1.2.12.1 TeamPoS 7000 Front Panel Switch and LCD Matrix
Button Button/LED Position Comment
Reset
switch
Between
LEDs and
buttons
Resets system; all data in
memory will be lost.
Volume
Down
Leftmost
button
Press to decrease speaker
volume.
Volume
Up
Second
from left
Press to increase speaker volume.
Brightness
Down
Second
from right
Press to decrease monitor
brightness.
Brightness
Up
Rightmost
button
Press to increase monitor
brightness.
HDD/SSD
activity
Leftmost
LED
This LED flashes to indicate
HDD/SSD read/write activity.
5V Standby
(MB power)
Second
from left
Indicates that AC power is
supplied to the power supply and
standby voltages for the
motherboard are available.
Unused
LED
Third from
left
Unused.
Memory
Diagnostic
Middle
LED
This LED is illuminated when
the BIOS memory test detects a
memory error.
Fan
Diagnostic
Third from
right
This LED is illuminated when
the BIOS detects a fan failure (all
models except A100).
HDD2/SSD2
Diagnostic
Second
from right
This LED is illuminated when
HDD2/SSD2 is not detected.
HDD1/SSD1
Diagnostic
Rightmost
LED
This LED is illuminated when
HDD1/SSD1 is not detected.
Caution: It is assumed that the user of this manual fully understands and
strictly adheres to proper Electrostatic Discharge (ESD) precautions. Failure
to adhere to precautions can cause damage to this equipment.
Always remove the power cord from the unit prior to performing any system
maintenance.