FUJITSU TeamPoS 7000 - Manual (Page 23)

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
TeamPoS7000_User Guide_D900000454.pdf Chapter 3 - Basic Operations
Revision 1.0 - March 6, 2012 Adjusting the Displays - 21
3.3 Adjusting the Displays
3.3.1 LCD Display
To read the LCD display easily, you can adjust the angle and brightness. Adjust the screen as
necessary to suit your store environment.
• Adjusting the screen angle
You can adjust the angle of the screen on Countertop Mount models as shown below. Hold
the top of the monitor with one hand while steadying the base with the other hand. Tilt
slowly to the desired angle.
• Adjusting the Brightness
Open the panel cover located under the monitor. Press the Brightness Up and Brightness
Down buttons to increase or decrease the brightness of the screen. The location of the
panel is shown on
page 11 .
90 o Tilted Flat 0 o
(Storage/space savings)
The A100 model should
not be powered when flat
Brightness Down Brightness Up