FMC Corporation - Talstar FMC L06 User Manual
FMC Corporation - Talstar Pumps
![background image](/manuals/103808/1/background.png)
Doc No: OMM50000903
Rev: B Page 1 of 65
Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.
OPERATION AND MAINTENANCE MANUAL, L06 THROUGH L16
TRIPLEX PUMPS
Rev
ECN No.
Date
Reviewed By
Approved By
Status
B
5018139
29-MAY-2007
Lyon, Tim
Singleterry, Ronald
RELEASED
Summary:
This is a manual for FMC L06 through L16 triplex piston pumps. These pumps include
direct drive (no pinion shaft) and pinion drive (for internal gear reduction) and have a
stroke length ranging from 1.50” through 4.00”.
Document Outline
- Title Page
- Table of Contents
- 1.0 Important Safety Instructions
- 2.0 L06 - L16 Pump Features
- 3.0 Storage Instructions
- 4.0 Installation Guidelines
- 5.0 How to Start a Pump
- 6.0 Lubrication of Power End
- 7.0 Inspection and Preventative Maintenance Chart
- 8.0 Estimated Life of Wearing Components
- 9.0 Component Parts List
- 10.0 Service Procedures
- 11.0 Fastener Torque Requirements
- 12.0 Critical Clearances
- 13.0 Valve Removal and Installation Tools
- 14.0 Trouble-Shooting Pumps
- 15.0 Ordering Parts
- 16.0 Glossary of Commonly Used Terms
- 17.0 Reference Information
- List of Figures
- Figure 1: L11 - L16 Pump Assembly with Pinion Shaft
- Figure 2: L06 - L16 Pump Assembly with No Pinion Shaft (Includes HD & HV)
- Figure 3: Power End Components
- Figure 4: Fluid End Components
- Figure 5: AR Valve Assembly
- Figure 6: Using the Knock Out Tool
- Picture 1: Removing the valve from the seat
- Picture 2: Removing the valve from the fluid cylinder
- Figure 7: Valve Disassembly
- Figure 8: Eccentric Disc in Use
- Figure 9: Removing the seat
- Figure 10: Hydraulic Power used to Remove Valve Seat
- Picture 3: Mandrel Type Tool
- Figure 11: Mandrel Tool in use
- Figure 12: Threaded Tool in use
- Figure 13: Typical L Series Disc Valve Assembly
- Figure 14: Illustration of the P534694 and P534695 Ball Knock Out Tools