Fluke 700G - Manual (Page 25)

Pressure Gauge
Replacement Parts and Accessories
15
Error Codes
A list of error codes are in Table 7.
Table 7. Error Codes
Error Description
101 A non-numeric entry was received where a numeric entry is necessary
102 Too many significant digits entered
103 Invalid units or parameter value received
105 Entry is above the upper limit of the allowable range
106 Entry is below the lower limit of the allowable range
108 A required command parameter was missing
109 An invalid pressure unit was received
117 An unknown command was received
120 The serial input buffer overflowed
121 Too many entries in the command line
122 Pressure module not connected
Replacement Parts and Accessories
Table 8 lists the customer replaceable parts. Replacement parts can be ordered from
Fluke Corporation and its approved representatives. Use the part number when you order
the replacement part or accessory. See the “How to Contact Fluke” section.
Table 8. Replacement Parts and Accessories
Part Number Description
4110667 FLUKE-700G, DECAL, FRONT
4110671 FLUKE-700G, DECAL, BACK
4110680 FLUKE-700G04,15 PSI, MANIFOLD DECAL
4110698 FLUKE-700G05, 30 PSI, MANIFOLD DECAL
4110705 FLUKE-700G06,100 PSI, MANIFOLD DECAL
4110710 FLUKE-700G27, 300 PSI, MANIFOLD DECAL
4110722 FLUKE-700G07, 500 PSI, MANIFOLD DECAL
4110731 FLUKE-700G08, 1000 PSI, MANIFOLD DECAL
4110746 FLUKE-700G29, 3000 PSI, MANIFOLD DECAL
4110754 FLUKE-700G30, 5000 PSI, MANIFOLD DECAL
4110768 FLUKE-700G31, 10000 PSI, MANIFOLD DECAL
4110779 FLUKE-700G, PRESSURE GAUGE, BOOT
4123225 Fluke 700G/TRACK Software and Serial Cable