Fluke 700G - Manual (Page 10)

700G Series
Calibration Manual
2
Safety Information
A Warning identifies conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or
the equipment under test.
XWWarning
To prevent possible electrical shock, fire, or personal injury:
• Use the Product only as specified, or the protection supplied by
the Product can be compromised.
• The battery door must be closed and locked before you operate
the Product.
• Replace the batteries when the low battery indicator () shows to
prevent incorrect measurements.
• Do not use and disable the Product if it is damaged.
• Read all safety Information before you use the Product.
• Do not use the Product in damp or wet environments.
WCaution
To prevent possible damage to Product or to equipment under
test:
• If the display reads “OL” the range limit is exceeded and the
pressure source must immediately be removed.
• Do not exceed the maximum torque allowed. Maximum torque
allowed is 13,5 Nm = 10 ft lb.
Hazard Location Information/Approvals
Ex-Hazardous Areas
An Ex-hazardous area as used in this manual refers to an area made hazardous by the
potential presence of flammable or explosive vapors. These areas are also referred to as
hazardous locations, see NFPA 70 Article 500.
) ® LR110460
Class I, Div. 2, Groups A-D
( II 3 G Ex nA IIB T6
KEMA 06ATEX0014 X
Ta=–10 °C... +55 °C