Furuno GP-1610C - Manual (Page 8)

8
Setting Destination
When you set a destination, this unit computes the range, bearing and course to the destina-
tion. To display your destination on the screen select a small display range or scale. To set as
destination a point which is 20 nm from your harbor do the following:
CSE 180.0 ° SPD 0.0kt 2D
DEP 110 m TMP - - .- ° C 14:40
POS 34 ° 26.345’N 135 ° 41.232’E
Press until position
for destination
appears.
CSE 180.0 ° SPD 0.0 kt 2D
DEP 110 m TMP - - .- ° C 14:53
POS 34 ° 26.345’N 135 ° 41.232’E
SELECT GOTO MODE
Set point as
destination.
WPT List
EVENT List
ROUTE List
Cursor/Route plan
Shrink display
range or scale.
If "Cursor/Route plan"
is not in reverse video,
press
▼ to do so.
ENT: Sel CLR: Release
ESC: Cancel
2 Press the GOTO key.
1 Press the ZOOM OUT key.
Destination
point
MENU
ESC
DISP
SEL 1 EVENT
MOB 6
WPT
2
GOTO
7
MARK
3
PLTR
8
ZOOM
OUT 9
CNTR
5
CLR
TONE
POWER
ZOOM
IN 4
CURS
0
NU/CU
ENT
2
1